Swamp Treat™



            Swamp Treat 1lb bottle

            At a Glance


            General Info
            Product Name: Yellow Treat
            Product Type: Rescue Algicide/Algaecide
            Available Sizes: 1lb | 25lb 
            Dosage: 1 lb per 20,000 gallons
            Active Ingredient: Sodium Bromide (NaBr) 67.6%
            Appearance: White salt granules
            First Introduced: 2012

            Compatibility
            Surface: All
            Sanitizer: Chlorine, Bromine
            Filter: All

            Synopsis

            We believe in every nightmare pool is hiding a dream pool just waiting to be seen. And we want to make that dream a reality as easy and quickly as possible. That’s why we have Swamp Treat®. Swamp Treat® is our most powerful algaecide. It’s patented formula accelerates chlorine so much that it can turn a dense green pool to clear in 24 hours or less. Even more astonishing than its speed is that it also will leave a chlorine residual, eliminating the need for follow up shock treatments – saving you time and money.

            Directions

            It is a violation of federal law to use this product in a manner inconsistent with labeling. Always add Swamp Treat™ directly to pool or spa.

            1. For swimming pools, add 1 pounds of Swamp Treat™ per 20,000 gallons by broadcasting directly onto pool water surface.

            2. Brush pool or spa.

            Black Algae Tip: Use a 50/50 brush and concentrate brushing in areas that deposits are present.

            3. Independent of chlorine level, immediately add liquid or dry chlorinating product for super-chlorination. Use the recommended dosage rate for superchlorination from an EPA registered chlorinating product.

            Black Algae Shocking Recommendations

            For white plaster: 4 lbs. of granular  trichloro-s-triazinetrione per 20,000 gallons of water near the black algae areas.
            For Vinyl/Painted Fiberglass/Colored Plaster/Exposed Aggregate: predissolve in a bucket of water 5 lbs. of dichloro-s-triazinetrione per 20,000 gallons and pour in the deep end of the pool.


            4. Before swimming, use test kit for measuring chlorine level, as directed on your chlorinating product label. Do not enter the water or swim until the chlorine residual drops to 3 ppm.

            5. To prevent the reoccurance of algae and maintain crystal clear water, No Mor Problems® may be used in conjunction with chlorinating and brominating products. Follow the directions for use for No Mor Problems® and maintain the chlorine or bromine level recommended on your chlorinating or brominating product.


            Updated: 22 Jun 2017 08:57 AM
            Helpful?  
            Help us to make this article better
            0 0